HP e-PC c10s10 User Manual
Page 22
2 Starting e-Diagtools
Starting e-Diagtools from the Utility Partition on your Hard Disk
22
English
Option 2: Starting e-Diagtools on Other HP Computers
(Including HP Notebook PCs)
1 Restart your computer.
2 After the initial splash screen with the HP logo, a message is displayed. The exact
message may vary; here are two examples:
Press <F10> to enter HP Utility Partition ...
or any other key to proceed
Press <F10> to start diagnostics
Press the <
F10
> key.
If this message does not appear, it probably means that the Utility Partition has been
disabled or deleted. Refer to "If You Are Unable to Start e-Diagtools From the Hard
Disk", on page 23.
3 The following menu appears: Select the desired option. This menu is described in
more detail in "The e-Diagtools Main Menu", on page 25.
Some menu
options are
not available
on all HP
computers