HP Integrity BL870c i2 Server-Blade - Manual (Page 93)

Command line 93
Name RFC Description
Error Status Block (LESB).
fcInvalidTxWords 4044 fcmPortInvalidTxWords - The number
of invalid transmission words
received at this port. This count is
part of FC-PH's Link Error Status Block
(LESB).
fcLinkFailures 4044 fcmPortLinkFailures - The number of
link failures. This count is part of FC-
PH's Link Error Status Block (LESB).
fcLossOfSynchronization 4044 fcmPortLossofSynchs - The number of
instances of synchronization loss
detected at this port. This count is
part of FC-PH's Link Error Status Block
(LESB).
fcNumberLinkResets 4044 fcmPortLinkResets - The number of
times the reset link protocol was
initiated on this port. This includes
the number of Loop Initialization
Primitive (LIP) events on an arbitrated
loop port.
fcNumberOfflineSequenc
es
FCMG
MT-MIB
connUnitPortStatCountNumberOffline
Sequences - Count of Offline
Primitive sequence received at this
port.
Note, this is a Fibre Channel only
stat.
fcPrimitiveSeqProtocolErro
rs
4044 fcmPortPrimSeqProtocolErrors - The
number of primitive sequence
protocol errors detected at this port.
This count is part of FC-PH's Link
Error Status Block (LESB).
fcRxByteRate N/A Average receive byte rate (Byte/s)
for sample period of once a second.
fcRxFrameRate N/A Average receive frame rate (frame/s)
for sample period of once a second.
fcRxLinkResets 4044 fcmPortRxLinkResets - The number of
Link Reset (LR) Primitive Sequences
received.
fcRxOfflineSequences 4044 fcmPortRxOfflineSequences - The
number of Offline (OLS) Primitive
Sequences received at this port.
fcSmoothingOverflowErro
rs
N/A The number of times that a violation
of FC rules on the incoming signal
were detected. An example of a
violation would be an insufficient
number of idles were received
between the frames.
fcTotalRxBytes N/A Total number of bytes received.