HP 3PAR Application Software Suite for VMware - Manual (Page 90)

Updating Registered Remote Copy Pairs Information
1. Launch Recovery Manager Software for VMware vSphere Admin Tool and click the HP 3PAR
Management Plug-in and Recovery Manager Software for VMware vSphere.
2. Click Remote Copy Pairs tab.
3. Select a Remote Copy pair from the list and click Update.
4. Select the new system information from the Local and Remote drop-down menus. If applicable,
enter another RMV host name.
5. Click Update.
Viewing Host Information Summary
From the vSphere Plug-in Storage System tree pane, select a storage system, and click the Summary
in the detail pane to view the information of the storage system.
NOTE: If Transparent Failover is enabled, the local Virtual Copies are disabled because VC
snapshots are taken both locally and remotely using Virtual Copy creation.
Figure 72 Storage System Summary
Table 10 Storage System Summary Information
Value General
Name of storage system System name:
Model of storage system System model:
Storage system serial number Serial number:
Storage system ID number System ID:
World Wide Name of storage system System WWN:
Number of nodes available in storage system Number of nodes:
Nodes appearing online Nodes online:
Login user Logged on as:
90 Working with Remote Copy