HP NonStop G-Series - Manual (Page 87)

Formatting Reports and Plots
Measure User’s Guide — 520560-003
4- 27
Changing the Plot Window
Changing the Plot Window
Specifying a plot window directs MEASCOM to read only records written to the data file
within the specified period. Because you are viewing a subset of the available data, the
plots displayed using the plot window are typically different from those displayed by
default.
Use the TO, FROM, and FOR clauses of the LIST PLOT command to adjust the time
window of the plot.
Example 4-15 on page 4-28 shows a two-axis plot of data collected between 11:00
a.m. and 12:00 p.m. for the five busiest CPUs. The first interval shown on the plot
corresponds to the starting time of the measurement.
Example 4-14. Changing the Density of a Bar Graph
63+ LIST PLOT, VERT-BASE OFF, TIME-BASE OFF, WIDE-ITEM ON
100 -----------------------------------------
95.0 - -
90.0 - -
85.0 - -
80.0 - -
75.0 - -
70.0 - -
65.0 - ----- -
60.0 -| | -
55.0 -| | -
50.0 -| |----- -
45.0 -| | |----- ----- -
40.0 -| | | | | -
35.0 -| | | | | -
30.0 -| | | | |----- -
25.0 -| | | | | | -
20.0 -| | | | | | -
15.0 -| | | | | | -
10.0 -| | | | | | -
5.00 -| | | | | | -
0 -| | | | | |---------
A B C D E
Min value = 27.771 Max value = 60.852
A: CPU-BUSY-TIME Cpu 3
B: CPU-BUSY-TIME Cpu 1
C: CPU-BUSY-TIME Cpu 2
D: CPU-BUSY-TIME Cpu 10
E: CPU-BUSY-TIME Cpu 4
Note. Specifying a time window in the LIST entity-type command affects the entities
included in the plot, not its time window.