Audiovox Rampage ACD-70 - Manual (Page 15)

CD CHCD CHCD CHCD CHCD CH
AAAAA
NGER CONTRNGER CONTRNGER CONTRNGER CONTRNGER CONTR
OLOLOLOLOL
S / CD CHS / CD CHS / CD CHS / CD CHS / CD CH
AAAAA
NGER ERRNGER ERRNGER ERRNGER ERRNGER ERR
OR CODESOR CODESOR CODESOR CODESOR CODES
14 14 14 14 14
Scan mode will also be canceled by
activating another disc function (Top, Repeat
or Random Play).
du
DISC/TRACK REPEAT PLAY (RPT)
When the Repeat button is pressed, the RPT
indication will appear on the display panel
and play of the selected track will be
continually repeated until the Track Repeat
mode is canceled by pressing the Repeat
button again or by activating the Disc Select
dq
, Scan
dt
or Random Play
el
functions.
When the Repeat button is pressed twice
the
DISC and RPT indications will appear
on the display panel and play of the selected
disc will be continually repeated until the Disc
Repeat mode is canceled by pressing the
Repeat button again or by activating the
Scan
dt
or Random Play
el
functions.
el
DISC/TRACK RANDOM PLAY (RND)
When the Random button is pressed, the
RND indication will appear on the display
panel and the tracks on the disc will be
played in a random, shuffled order. The Track
Select button
dr
will also select tracks in
the shuffled order instead of the normal
progression. The Random Track mode can
be canceled by pressing the Random button
again or by activating the Disc Select
dq
,
Scan
dt
or Repeat Play
du
functions.
When the Random button is pressed again,
the
DISC and RND indications will appear
on the display panel and the discs in the
magazine will be played in a random, shuffled
order, as well as the tracks on each disc.
After playing a track selected at random from
a disc in the magazine, the unit will select
another disc at random and play a randomly
selected track on it. This will continue until
the Random Disc mode is canceled by
pressing the Random button again or by
activating the Scan
dt
or Repeat Play
du
functions.
If a problem should develop while operating the CD changer, the following error codes
may appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
of the CD changer). Re-load the magazine and check for proper operation. You may
also try activating the RESET button
dm
on the unit, but this will also erase the time and
pre-set memories.
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.
CD CH CD CH CD CH CD CH CD CH A A A A A NGER ERR NGER ERR NGER ERR NGER ERR NGER ERROR CODES OR CODES OR CODES OR CODES OR CODES