HP StorageWorks Ultra Density Optical Storage - Manual (Page 25)

Troubleshooting
25 HP StorageWorks 30ux Standalone UDO Drive User’s Guide
Other SCSI devices no longer work
when the drive is installed
■
Check SCSI ID assignments and
resolve any conflicts.
■
Ensure that the SCSI ID for the HBA
is different from that of the drive.
■
Check for proper SCSI cabling and
termination.
■
Ensure the maximum cable length
for the bus has not been exceeded
(12 meters for LVDS and 3 meters
for SE).
Table 3: Troubleshooting installation (Continued)
Problem Solution