HP NonStop G-Series - Manual (Page 262)

EDIT Error Messages
EDIT Error Messages
A–4 058061 Tandem Computers Incorporated
COMMUNICATION FAILURE (FILE ERROR = errornum)
You were using the TEDIT command to start the TEDIT editing program
when either EDIT had a communication problem with the startup message
to TEDIT or EDIT had a problem with the TEDIT process once it was
started. This is an internal error that you cannot correct. Try the command
again, or tell your system operator.
CPU FAILURE: xx
Your file should be undamaged after a processor failure. Just start editing
again. If you re-enter EDIT and receive the FILE IS INVALID message,
follow the EDIT Error Recovery Procedure in Appendix B.
EXCLUSIVE ACCESS TO THIS FILE IS NOT AVAILABLE
You receive this message when the EDIT program cannot exclusively access
a file, for example in the OUT option of the LIST command. Wait a few
minutes, then try the command again.
{ filename } FILE ERROR: errornum
{ ?? }
An unrecoverable error occurred with the file named filename .
errornum is the file system error number.
LINE line EXCEEDS 'OUTLEN' BY num CHARACTERS
You receive this message when the SET OUTLEN command is not set large
enough to accommodate the number of characters in the line.