Specifications, Cx4 twin-axial cable, General specifications – HP NC510C PCI-E 10 Gigabit Server Adapter User Manual
Page 10: Compliance
Specifications 10
Specifications
In this section
CX4 Twin-axial cable.............................................................................................................................. 10
General specifications ............................................................................................................................ 10
Compliance........................................................................................................................................... 10
Power and environmental specifications.................................................................................................... 11
CX4 connector pinout description............................................................................................................. 11
CX4 Twin-axial cable
The NC510C adapter uses a 10Base-CX4 copper interface to deliver Gigabit Ethernet over four twin-
axial copper cable pairs as specified in the IEEE 802.3ak standard. For troubleshooting and other
information about cabling, see the CX4 connector pinout description (on page
11
).
General specifications
General
specifications
Value
Controller NETXEN
NX2031
Data rate
10 Gbps, full-duplex
PCI bus
8 Lane (x8) PCI Express, compatible with x4 and x8 bus widths
Cable connector
4x InfiniBand® (SFF-8470)
Cable distance
15 meters with CX4 x4 twin-axial cable
Dimensions (LxW)
6.6 x 2.5 in (16.5 x 6.4 cm) without bracket
Compliance
Compliance Standard
IEEE
802.1p (QoS), 802.1Q (VLANs), 802.3ae (10 Gigabit Ethernet), 802.3ak (CX4),
802.3x (flow control)
Safety
UL Mark (US and Canada)
EN 60950
Emissions
FCC Class A, VCCI Class A, BSMI Class A, CISPR 22 Class A, ACA Class A,
EN55022 Class A, EN55024-1, ICES-003 Class A, MIC Class A