HP Insight Management-Software - Manual (Page 47)

• Fibre Channel SAN fabric settings:
—
Enable SMI-S
— Fibre Channel SNMP settings:
Enable SNMP
Read Community
System Contact
Each SNMP trap Community and IP address
• For each Fibre Channel fabric:
—
Fabric name
• For each network uplink:
—
Name
— State
— Connection mode
— Smart link
— Private network
— Enable VLAN tunneling
— States
— Network port location
— Speed/duplex mode
— Connection mode
— Preferred link connection
— Preferred link connection speed
— Maximum link connection
— Maximum link connection speed
• For each shared network:
—
Uplink Set Name
— State
— Smart Link
— External VLAN ID
— Native VLAN
— Number of VLANs tagged associated to the shared network uplinks
• For each uplink set name:
—
Connection Mode
— Network Port Location
Performing VC Domain Maintenance
The VC Domain that maintenance operation comprises these steps:
1. Initiate the VC Domain Maintenance.
2. Perform changes through the Virtual Connect Manager Web interface.
3. Confirmed the VC Domain changes through VCEM.
To perform VC Domain Maintenance from the VC Domains page:
1. Select the VC Domain upon which you want to perform VC Domain Maintenance.
2. Click VC Domain Maintenance. The VC Domain Maintenance page appears.
3. To unlock Virtual Connect Manager for domain, network, and storage changes, click Make
changes via VC Manager
. Virtual Connect Manager web interface appears in a separate
browser window. The Under Maintenance status indicates that the VC Domain is temporarily
unlocked for domain, network, and storage changes.
VC Domain Maintenance 47