HP Designjet T1100 MFP series User Manual
Page 146
Advertising
7.
Unscrew and remove the cutter stop using the TORX PLUS screwdriver provided with the new
cutter. The screw is captive and will not fall out.
8.
Remove the old cutter.
9.
Take the new cutter from the maintenance kit and move the plunger at the top slowly back and
forth within its housing to check that it moves freely.
134 Chapter 12 Maintaining the printer
ENWW
Maint
aining t
h
e printer
Advertising
This manual is related to the following products: