HP LaserJet Pro M701 Printer series User Manual
Page 74
Advertising
2.
Remove the paper from the tray, and discard any
damaged paper.
3.
Make sure the paper guides are adjusted for the
correct paper size. If necessary, unlock the tray
using the slide lock at the rear of the tray, and
then adjust to the correct paper size.
4.
Load the paper into the tray. Make sure that the
stack is flat at all four corners and that the top of
the stack is below the maximum-height
indicators.
66
Chapter 6 Solve problems
ENWW
Advertising
This manual is related to the following products: