HP Insight Foundation Software for ProLiant User Manual
Page 20
example, certain ROM components, use the Delete feature of the VCRM to remove it from the system and
catalog.
To configure the repository and automatic update settings:
NOTE:
You can also configure the Automatic Update Settings using the Command Line Interface (CLI).
1.
Click the Home tab. The Home page appears.
2.
Click the Change Repository and Update Settings link. The Repository Directory page appears.
3.
In the Directory field, enter the location that you want to monitor for components and
. This must be a local path on the repository system. Be sure that the directory
can be accessed with
read-write privileges by the VCRM Win32 service. Click Reset to restore the
original directory setting, or you can click Cancel to abort the change.
Note: The directory path cannot contain the ampersand (&) character. If this character is used, the
VCRM is unable to change the settings.
4.
Click Next. The Download HP ProLiant and HP Integrity Support Packs for Operating System
page appears.
Select the operating systems from the list. VCRM downloads the HP ProLiant Support Packs and HP
Integrity Support Packs for the selected operating systems during the scheduled update.
5.
Click Next. The Automatic Update Settings page appears.
20
Navigating the software