HP StorageWorks 2.32 Edge Switch - Manual (Page 102)

Configuring SAN Products and Fabrics
102 HA-Fabric Manager User Guide
2. Review the source and destination ports, as well as route details.
3. Click Close.
Changing a Fabric’s Properties
To view and change a fabric’s properties, perform the following:
1. Right-click a fabric icon or the background of an expanded fabric and choose
Properties. The fabric’s Properties dialog box displays, as shown in
Figure 47 .
Figure 47: Fabric Properties dialog box
2. View the fabric’s information and edit the nickname, if desired.
Note: Once you assign a nickname, you cannot delete it and leave it blank.
3. Click OK.