HP StorageWorks 2.32 Edge Switch - Manual (Page 153)

Optional Features
153 HA-Fabric Manager User Guide
Configuring the Open Systems Management Server
Use these procedures to configure the open systems inband management program
to function with the switch.
The optional Open Systems Management Server feature must be installed in order
to perform this procedure.
To configure the Open Systems Management Server, use the following steps:
1. Choose Configure > Management Server from the Element Manager
window. The Configure Open Systems Management Server dialog box
displays, as shown in
Figure 83 .
Figure 83: Configure Open Systems Management Server dialog box
2. Enable the management server by clicking the Enable Management Server
check box. (To disable the management server, click the check box again to
remove the check mark.)
3. Click the check box in the Host Control Prohibited field to display a check
mark and to prohibit the host management program from changing
configuration and connectivity parameters on the switch. In this case, the host
program has read-only access to configuration and connectivity parameters.
Clicking the check box when it contains a check mark removes the check
mark and allows a host program to change configuration and connectivity
parameters on the switch.
4. To activate changes and close the dialog box, click Activate.
5. If you are finished configuring the switch, you can back up the configuration
data.