HP Insight Management-Software - Manual (Page 33)

VCEM validates the following components when adding a VC Domain to a VC Domain group,
therefore the VC Domain configuration must be identical to the VC Domain Group configuration.
Verify that the following components are identical:
•
Interconnect bays location and model
•
Enclosure model
•
Domain settings:
Configuration for double density servers (for example, BL2x220c) ◦
◦ Configuration for full-height and half-height single density servers (for example, BL460c,
BL480c)
•
Network Access Groups
◦ Name(s) and networks
•
Ethernet and iSCSI Flex-10 settings:
MAC Cache Failover: ◦
– Enable Fast MAC Cache Failover
– MAC Refresh Interval
◦ IGMP Snooping:
Enable IGMP Snooping –
– IGMP Idle Timeout Interval
◦ Server VLAN Tagging support:
Tunnel VLAN Taggings or Map VLAN Taggings –
– Force Server connection setting
◦ Multiple Network Speeding Settings:
Preferred Link Connections –
– Preferred Link Connection Speed
– Maximum Link Connection
– Maximum Link Connection Speed
◦ Network SNMP settings:
Read Community –
– System Contact
– IP addresses
◦ Port Throughput Statistics
◦ VLAN Capacity
– Legacy VLAN capacity or Expanded VLAN capacity
•
Fibre Channel SAN Fabric settings:
Enables SMI-S ◦
◦ Fibre Channel SNMP settings: Read Community, System Contact, and IP addresses
•
Network and Fibre Channel SAN Fabrics uplinks
Requirements for adding a VC Domain to a VC Domain Group 33