Connecting the network cable – HP NC373T PCI Express Multifunction Gigabit Server Adapter User Manual
Page 10
Installing an adapter 10
2.
Remove the standard profile bracket and place the low profile bracket over the connector. Be careful
not to damage the connector or bind the low profile bracket to the connector.
Connecting the network cable
Network connections for the NC373T adapter can employ existing UTP CAT5 (or better) cable for
Gigabit over copper transmissions. For new installations, CATe (enhanced CAT5) or better cable is
recommended.
To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks
into position indicating that it is properly seated.
WARNING:
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug
telephone or telecommunications connectors into RJ-45 connectors.
For more information, see UTP cable specifications.