HP 3PAR Application Software Suite for Oracle - Manual (Page 193)

SOLUTION
Make sure the TPDSYSNAME and TPDUSERNAME have correct values in the configuration file.
Make sure the volumes were not removed, which can cause the error. Contact customer support
for further investigation.
MESSAGE ID
1228
SYMBOLIC NAME
RMO_ERROR_VXVM_ASM_MOUNT_LOCK
MESSAGE
3PAR1228: ERROR: Another database Virtual Copy is currently mounted.
Only one Virtual Copy per database can be mounted at any time when ASM or VxVM is in use.
If there is no other Virtual Copy of this database mounted, remove the lock file <file name> and
try again.
REASON
For an ASM or VxVM managed database, only one Virtual Copy can be mounted at any time on
the backup server.
SOLUTION
If the lock file is the result from previous failed operation, remove it. Otherwise, wait until the same
operation finishes.
MESSAGE ID
1229
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_ISCSI_PORT
MESSAGE
3PAR1229: ERROR: Could not retrieve iSCSI port information from the HP 3PAR StoreServ Storage
system.
REASON
Failed to run the HP 3PAR CLI command showport -iscsiname.
SOLUTION
Make sure the SSH connection from the current server to the specified HP 3PAR StoreServ Storage
system is valid, the parameter in configuration file is up-to-date, and permissions are correct for
the user to execute rmora commands. Contact customer support for further investigation.
MESSAGE ID
1230
SYMBOLIC NAME
RMO_ERROR_RETRIEVE_FC_PORT
MESSAGE
3PAR1230: ERROR: Could not retrieve FC port information from the HP 3PAR StoreServ Storage
system.
REASON
Failed to run the HP 3PAR CLI command showport.
SOLUTION
Make sure the SSH connection from the current server to the specified HP 3PAR StoreServ Storage
system is valid, the parameters in configuration file are up to date, and permissions are correct
for the user to execute commands. Contact customer support for further investigation.
193