Installation – HP 3PAR Application Software Suite for Oracle User Manual
Page 32
2.
Insert the HP 3PAR Recovery Manager CD into a CD-ROM drive.
If the CD is not mounted automatically, mount it manually.
# mount -F hsfs -o ro /dev/dsk/c0t6d0s2/cdrom
3.
Change to the CD-ROM drive.
# cd /cdrom/cdrom0/
4.
Enter ./rmora_uninstall.sh.
Confirm you want to uninstall RMO when prompted.
# ./rmora_uninstall.sh
Welcome to HP 3PAR Recovery Manager for Oracle
Checking for existing Recovery Manager installation...
The following version of RMOra has been found:
Currently Installed version: 4.4.0.1
Do you want to remove the existing RMOra? (y/n)y
Removing existing RMOra...
Recovery Manager removed
Installing Recovery Manager for Oracle on HP UX Systems
Use the instructions in this section to install or upgrade Recovery Manager for Oracle on the
database and backup servers.
If you are not using the backup server as the NetBackup master server, be sure to install Recovery
Manager for Oracle on the NetBackup master server.
Installation
The following section describes the steps necessary for installing or upgrading Recovery Manager
for Oracle on an HP UX system:
1.
Log in as the root user.
2.
Insert the HP 3PAR Recovery Manager CD into a CD-ROM drive.
NOTE:
If the CD is not mounted automatically, mount it manually.
# mount -t iso9660 -r /dev/cdrom /mnt/cdrom
3.
Change to the CD-ROM drive.
# cd /mnt/cdrom0/
32
Installing and Uninstalling Recovery Manager