Installation – HP 3PAR Application Software Suite for Oracle User Manual
Page 34
Installing Recovery Manager for Oracle on IBM AIX Systems
Use the instructions in this section to install Recovery Manager for Oracle on the database and
backup servers.
If you are not using the backup server as the NetBackup master server, be sure to install Recovery
Manager for Oracle on the NetBackup master server.
Installation
The following section describes the steps necessary for installing Recovery Manager for Oracle on
IBM AIX system.
To install HP 3PAR Recovery Manager on IBM AIX system:
1.
Log in as the root user.
2.
Insert the HP 3PAR Recovery Manager CD into a CD-ROM drive.
NOTE:
If the CD is not mounted automatically, mount it manually.
To mount the CD on physical server, enter the following:
# /usr/sbin/mount -rv cdrfs /dev/cd0 /mnt/cdrom
To mount a CD on VIO clients:
1.
Create a Virtual SCSI Adapter or use existing one on the VIO server.
2.
To create a Virtual Device cd0 and to map it to Virtual Adapter, enter the following:
# mkvdev -vdev cd0 -vadapter vhost0
vtopt0 Available
3.
The CD is available to the same client, where vhost0 is mapped.
4.
To find out to which client the CD is mapped to, enter lsmap -all on VIO Server.
5.
On VIO Client, use mount command to mount a CD.
# /usr/sbin/mount -rv cdrfs /dev/cd0 /mnt/cdrom
3.
Change to the CD-ROM drive.
# cd /mnt/cdrom/
4.
Enter ./rmora_install.sh.
Welcome to HP 3PAR Recovery Manager 4.4.0.1 for Oracle
Checking for existing Recovery Manager installation...
Recovery Manager is not found on the system.
Do you want to install Recovery Manager for Oracle v4.4.0.1? (y/n) y
Installing Recovery Manager for Oracle v4.4.0.1...
aix_install=installp -a -X -d
/share/engineering/solutions/release/oracle/4.4.0.1/AIX RMOra.rte
+-----------------------------------------------------------------------------+
Pre-installation Verification...
+-----------------------------------------------------------------------------+
Verifying selections...done
Verifying requisites...done
Results...
34
Installing and Uninstalling Recovery Manager