HP LaserJet M4345 Multifunction Printer series - Manual (Page 63)

4 Setting the digital sending options
Administrators can use the screens available from the Digital Sending tab to control the digital-sending
features that some products offer.
NOTE Some products do not support all of these screens.
Using the HP DSS software
The HP LaserJet M3027mfp/M3035mfp, M4345mfp, and M5025mfp/M5035mfp products include the
Digital Sending Software (HP DSS) which can be used to carry out its digital-sending tasks. If the
HP DSS has been installed, all HP DSS screens are available for read-only access. However, if you try
to apply changes in any of the HP EWS Digital Sending screens, the following message appears:
The device is being serviced by the Digital Sending Software at <IP address>. Please use
Windows Configuration Utility to configure the device.
In this case, the digital sending options must be configured by using the HP MFP DSS Configuration
Utility. This centralizes the configuration tasks and helps control security.
ENWW Using the HP DSS software 53