Using the remote desktop method, Hp storage server management console, Figure 2 – HP ProLiant DL160 G5 Storage-Server User Manual
Page 26
Figure 2 HP Storage Server Management console
Using the Remote Desktop method
Remote Desktop provides the ability for you to log onto and remotely administer your server, giving
you a method of managing it from any client. Installed for remote administration, Remote Desktop
allows only two concurrent sessions. Leaving a session running takes up one license and can affect
other users. If two sessions are running, additional users will be denied access.
To connect the storage server to a network using the Remote Desktop method
1.
On the PC client, select Start > Run. At Open, type mstsc, then click OK.
2.
Enter the serial number of the storage server followed by a hyphen (-) in the Computer box and
click Connect. For example: D4059ABC3433-.
NOTE:
If you are able to determine the IP address from your DHCP server, you can substitute the
IP address for the serial number and hyphen (-). For example: 192.100.0.1.
3.
Log on to the HP ProLiant Storage Server with the default user name administrator and the
password hpinvent.
The HP ProLiant Data Protection Storage Server Management console and Rapid Startup Wizard
will start automatically.
NOTE:
You can change the administrator name and password when you configure the server using
the Rapid Startup Wizard.
4.
To complete network configuration using the Rapid Startup Wizard, see
“
Configuring the server on the network
Installing and configuring the server
26