HP Lights-Out 100 Remote Management - Manual (Page 28)

Using LO100 28
• Payload types
o IPMI Message
o RMCP+ Open Session Request/Response
o RAKP Message 1 / 2
o RAKP Message 3 / 4
• Authentication algorithms
o RAKP-none
o RAKP-HMAC-SHA1
• Integrity algorithms
o None
o HMAC-SHA1-96
• Confidentiality algorithms
o None
o AES-CBC-128
Logging in to LO100
You can log in to the remote management processor through a web browser (" Logging in through a web
browser " on page 28 ) or through the CLP (" Logging in through the CLP " on page 29 ). If you are unsure of
your DHCP IP address, refer to the "Configuring network access (on page 11 )" section.
Logging in through a web browser
1. Browse to the IP address of the remote management processor to access the login screen.
2. Enter your user name and password. The default user name for the Administrator account is admin,
and the default password is admin. The default user name for the Operator account is Operator,
and the default password is Operator.