HP XP P9000 for Compatible PAV Software Licenses - Manual (Page 12)

5. Select one or more base volumes in the Base Volume List. Press Ctrl and click to select multiple
base volumes, press Shift + click to select a series of base volumes, or click Select All to select
all base volumes in the CU image.
6. Select one or more free volumes in the Free Volume List. Press Ctrl and click to select multiple
free volumes, press Shift + click to select a series of free volumes, or click Select All to select
all free volumes in the CU image.
7. Click Add to assign the selected free volume(s) to the selected base volume(s). The assignments
appear in the Alias Volume List shown in the following figure.
8. Confirm the alias volume(s) assigned to the selected base volume(s) in the Alias Volume List.
9. Click Apply to apply the current alias assignments in the Alias Volume List.
Removing aliases from base volumes
Alias volumes may be removed from base volumes using the Parallel Access Volumes window.
Prerequisites
•
No I/O operations are currently being performed on base devices. Removing alias devices
while I/O operations are occurring can cause a serious failure.
•
You must have the Storage Administrator (Provisioning) role to perform this task.
To remove aliases from base volumes:
1.
In the Remote Web Console main window, select Actions > Mainframe Connection > Parallel
Access Volumes.
2. Click to change to Modify mode.
3. In the Parallel Access Volumes window (shown in the following figure), select the LDKC which
includes the CU image to be modified from the LDKC list.
12 Performing Parallel Access Volumes operations