Configure the product on the network, Set up the product on the network, View settings – HP Color LaserJet CP2025 Printer series User Manual
Page 48
Configure the product on the network
To configure network parameters on the product, use the product control panel, or the embedded Web
server. For Windows operating systems, use the HP ToolboxFX software. For Mac OS X, use the
Utility button.
Set up the product on the network
Hewlett-Packard recommends that you use the HP software installer on the product CD-ROM to set up
printer drivers for networks.
NOTE:
You must connect the printer to your network prior to starting the software installation.
This product supports a 10/100 network connection. Plug the network cable into the product and your
network connection.
View settings
Network configuration page
The network configuration page lists the current settings and properties of the product network card. To
print the network configuration page from the product, complete the following steps.
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select Reports, and then press
OK
.
3.
Use the arrow buttons to select Network report, and then press
OK
.
Configuration page
The configuration page lists the current settings and properties of the product. To print the configuration
page from the product, complete the following steps.
1.
On the control panel, press
OK
.
2.
Use the arrow buttons to select Reports, and then press
OK
.
3.
Use the arrow buttons to select Config report, and then press
OK
.
38
Chapter 5 Connectivity
ENWW