Initiating standby (fn+f1) – HP Mini 1132TU PC User Manual
Page 63
Function
Hotkey
Initiate Standby.
fn+f1
Switch the image.
fn+f2
Decrease screen brightness.
fn+f3
Increase screen brightness.
fn+f4
Initiate QuickLock.
fn+f6
Mute device sound.
fn+f8
Decrease device sound.
fn+f10
Increase device sound.
fn+f11
To use a hotkey command on the device keyboard, follow either of these steps:
●
Briefly press the
fn
key, and then briefly press the second key of the hotkey command.
– or –
●
Press and hold down the
fn
key, briefly press the second key of the hotkey command, and then
release both keys at the same time.
Initiating Standby (fn+f1)
Press
fn+f1
to initiate Standby.
When Standby is initiated, your information is stored in memory, the screen is cleared, and power is
conserved. While the device is in Standby, the power light blinks.
Using the keyboard
53