HP Insight Control Software for Linux - Manual (Page 37)

A Capability matrix
For using HP or third party non-managed or managed devices and servers, the available power management
capabilities are given in the following table:
Table A-1 Insight Control power management capabilities
Rack/Power
Planning
Power
Capacity/Requirements
Power
Capping
Power
History
Power
ON/OFF/CYCLE
Control
Locator UID
Physical
Location
Power
Topology
Device Type
✓ Automatic
capacity
discovery 24-hour
complete ✓ ✓ Automatic
rack
placement
when
following
best-practice
wiring
strategy Intelligent
Power
Discovery HP iPDU
✓ Automatic
capacity
discovery A sample at
every 5-min
interval Manual Manual HP
Monitored
Power
Distribution
Units
✓ Automatic
capacity
discovery A sample at
every 5-min
interval Manual Manual HP Power
Distribution
Rack
✓ Automatic
capacity
discovery
(detail level
varies by the
device) A sample at
every 5-min
interval Manual Manual Supported
PDUs with
SNMP
support
✓ ✓ Dynamic
Enclosure
Capping 24-hour
complete ✓ Automatic
Physical
ordering
within the
Rack Manual HP
BladeSystem
✓ ✓
1
✓
1
24-hour
complete
1
✓
12
✓
1
Automatic
Physical
ordering
within the
Rack Intelligent
Power
Discovery 1 HP servers
with power
monitoring
or control
✓ Manual
specification
of maximum
power ✓
3
✓
2
Manual Manual HP or third
party
servers/devices
without
power
monitoring
or control
1 Available depending upon specific models. For more information, see HP Insight Software Support Matrix available at: http://
www.hp.com/go/insightcontrol/docs .
2 Device can be hard power-cycled if manually connected to iPDU outlets.
3 Power history can be derived if connected to a monitored outlet on a PDU.
37