HP 2000SA G2-Modular-Smart-Array - Manual (Page 30)

Set proxy provider debug log level
Description Gets or sets the debug log level for the proxy providers.
Syntax set loglevel
Prompts Enter the log level value. The default value is 0.
Supported log levels
• 0 — log comment, status, and critical
• 1 — log status, and critical
• 2 — log only critical
• 3 — disable logging
Output On success, acknowledges setting of the log level value as shown in Figure
15 , page 27.
On failure, displays the error message with possible cause.
Configuring the Proxy Provider 30