HP Storage Mirroring V5 Software - Manual (Page 15)

15 of 49
available in your Storage Mirroring Data Migration console installation directory
before you start your Storage Mirroring Data Migration server installations.
a. In your Storage Mirroring Data Migration console installation directory (by
default, \Program Files\StorageWorks\Storage Mirroring), look for the i386
and x64 directories. Only one of them will exist depending on the file you
downloaded and installed. If you originally downloaded a file with i386 in the
file name, you have only files for 32-bit machines. If you originally
downloaded a file with x64 in the file name, you have only files for 64-bit
machines.
b. Create the directory that does not exist. At this point, you should have
\Program Files\StorageWorks\Storage Mirroring\i386 and \Program
Files\StorageWorks\Storage Mirroring\x64.
c. Downloaded the file for the architecture that you need and copy it to your
Storage Mirroring Data Migration console machine.
d. Double-click the file to open it in WinZip.
e. Disable (uncheck) the option When done unzipping open \autorun.exe.
Make sure this option is off because you will not be able to install the files
because you already have the Storage Mirroring Data Migration console
installed.
f. Change the directory Unzip to folder to the \i386 or \x64 directory that you
created earlier. The directory name should correspond to the architecture of
the file you downloaded.
g. Click Unzip. After the files are unzipped, the additional files will be available
for the Storage Mirroring Data Migration console to use.
3. Open the Storage Mirroring Data Migration console and click Prepare from the left
navigation pane.
4. Identify the server where you want to install Storage Mirroring Data Migration.
●
Server—Specify the name of the server. You can also click Browse to select
the name from Active Directory or from a network drill-down list.
●
User name—Specify a user that is a member of the Double-Take Admin
security group on the source. If your source is the only domain controller in
your network, the account must also be a local account in the local
administrators group.
●
Password—Specify the password associated with the User name you
entered.
●
Domain—If you are working in a domain environment, specify the Domain.
●
License Type—Specify the type of license to be used on the server.
●
Source—The specified machine will be used as a source, meaning it
contains the data to be migrated. The installation will automatically