HP Integrity NonStop J-Series User Manual
Page 260
Error Messages
HP AutoSYNC User’s Guide—522580-017
D-6
Informational messages
123
Cause. An ASYSYNC process performed the TRIGGER option; it started a TACL
process or an OSS shell passing the trigger command. TACL or the OSS shell
abended. The message contains the user ID, destination node name, BATCHID, the
file-set ID, or a -1 if not available and an the error text or the error and error detail
code.
Effect. Effect. The file for which the trigger was executed is deleted and the old
destination file if it existed is restored into the destination location. The remaining files
in the file set are synchronized.
Recovery. An EMS message displays the name of the logfile SLggguuu, the key of
the log record, the SYNCfileset ID, the file error, and the filename portion of the file.
The user should then refer to the logfile for details.
124
Cause. The USER_AUTHENTICATE_ procedure failed to change the destination
ASYSYNC (or ASYSYNCP if synchronizing over TCP/IP) process state from a remote
to a local process.
Effect. The destination ASYSYNC process will abend.
Recovery. Set up the destination ASYSYNC object to allow local logon, which
requires making the procedure CALLABLE^LOCAL^LOGON callable and to license
and possibly PROGID the destination ASYSYNC object.
142
Cause. Configuration could not be accessed from the MapDB tables.
Effect. Configuration information is not available to the monitor; requested services
will not be performed.
Recovery. Correct the table access problem and issue the MONITOR
Trigger TACL or OSS shell process abended
Local Logon Denied
MAPDB access error