Extending battery life, Insert an sd card (optional), Start airlife – HP Compaq AirLife 100 series User Manual

Page 14: Initial start up, Initial setup using the get started assistant, Product registration, Insert an sd card (optional) start airlife

Advertising
background image

Extending battery life

To conserve battery power, take a look at the following tips:

Turn off Bluetooth when not in use. On the Home screen, press MENU on the keyboard, touch
Settings, touch Wireless controls, and then touch Bluetooth to uncheck.

Turn off Wi-Fi when not in use. On the Home screen, press MENU on the keyboard, touch
Settings, touch Wireless controls, and then touch Wi-Fi to uncheck.

Turn off GPS when not in use. On the Home screen, press MENU on the keyboard, touch
Settings, touch Location, and then touch Enable GPS satellites to uncheck.

NOTE:

If your battery completely discharges, you may lose data that has not been saved on your

AirLife.

Insert an SD card (optional)

You can use an SD card to backup data or expand storage on your AirLife.

1.

On the right side of your AirLife, push the SD card plug to eject it, and then pull it out.

2.

Insert SD card with the notch to the right and toward the slot.

See the instructions for a particular app for more information on accessing files on your SD card.

NOTE:

An SD card is not included with your AirLife and may be purchased separately.

Start AirLife

Initial start up

To start exploring your device immediately, press and hold the power button for a few seconds.

The first time AirLife is started, it will take a short amount of time.

NOTE:

During normal use, the AirLife display will darken while unused for an extended amount of

time. To light up the screen, open the display, press the power key or press MENU on the keyboard.

Initial setup using the Get Started Assistant

The first time you turn on your AirLife, the Get Started Assistant starts and helps you personalize your
AirLife, set up your email account, and more.

After you complete the Get Started Assistant, your AirLife is ready to use!

Product registration

You can conveniently complete the product registration for your new AirLife in the Get Started Assistant.

If needed, you can also proceed to a product registration over the web as follows:

Go to

http://www.hp.com/support

, select Register your HP product, and follow the onscreen

instructions.

6

Chapter 2 Getting Started

Advertising