HP Storage Mirroring V5 Software - Manual (Page 174)

19 - 28
Connection conState The state of the active connection
0 —None. This indicates a connection has not been established. Statistics are still
available for the source and target machines.
1 —Active. This indicates that the connection is functioning normally and has no
scheduling restrictions imposed on it at this time. (There may be restrictions, but it
is currently in a state that allows it to transmit.)
2 —Paused. This indicates a connection that has been paused.
4 —Scheduled. This indicates a connection that is not currently transmitting due to
scheduling restrictions (bandwidth limitations, time frame limitations, and so on).
8 —Error. This indicates a connection that is not transmitting because something has
gone wrong (for example, lost connection).
Only the Scheduled and Error states can coexist. All other states are mutually
exclusive. DTStat will display a conState of 12 when the connection is in both a
scheduled and an error state because this is the sum of the two values (4 + 8).
conOpsInCmd
Queue The number of operations waiting to be executed on the target
conOpsInAck
Queue The number of operations waiting in the acknowledgement queue. Each operation
that is generated receives an acknowledgement from the target after that operation
has been received by the target. This statistic indicates the number of operations
that have yet to receive acknowledgement of receipt.
conOpsInRep
Queue The number of replication operations currently waiting to be executed on the
target
conOpsInMir
Queue The number of mirror operations currently waiting to be executed on the target
conBytesInRep
Queue The number of replication bytes remaining to be transmitted to the target
conOpsTx The number of operations transmitted to the target. This is the total number of
operations that Storage Mirroring has transmitted as a source. In other words, the
cumulative number of operations transmitted by this source to all connected
targets.
conBytesInMir
Queue The number of mirror bytes remaining to be transmitted to the target
conBytesTx The number of bytes transmitted to the target. This is the total number of bytes
that Storage Mirroring has transmitted as a source. In other words, the cumulative
number of bytes transmitted by this source to all connected targets.
conBytes
CompressedTx The number of compressed bytes transmitted to the target.
conOpsRx The number of operations received by the target. The number of operations that
the target for this connection (as indicated by the IP address field) has received
from this source.
conBytesRx The number of bytes received by the target. The number of bytes that the target for
this connection (as indicated by the IP address field) has received from this source.
conResentOp
Count The number of operations resent because they were not acknowledged
conBytesInDisk
Queue The number of bytes in the source disk queue
conBandwidth
Limit The amount of bandwidth that may be used to transfer data
conBytes
Skipped The number of bytes skipped during a difference mirror. During a difference mirror,
if Storage Mirroring detects that there have been no changes to a file, then it will
indicate the number of bytes it did not send for this file in this field.
Category Statistic Description