HP ProLiant ML110 G4 Server - Manual (Page 13)

Using the Command Line Utility 13
Return values
SUCCESS: 0x00 indicates the command completed successfully.
FAILURE: 0x01 indicates the command failed.
hrconf setstate
This command redefines the state of a physical device from its current state to the designated state.
Syntax
hrconf setstate <Controller#> <Channel#> <Device#> <State>
Parameters
Controller# is the controller number.
channel# is the channel number for the drive.
device# is the device number for the drive.
The following State options are available:
•
HSP —Create a hot spare from a ready drive
•
RDY —Remove a hot spare designation
•
RBL —Rebuild drive
Example
hrconf setstate 1 0 1 HSP
hrconf setstate 1 0 2 RDY
hrconf setstate 1 0 2 RBL
Return values
SUCCESS: 0x00 indicates the command completed successfully.
FAILURE: 0x01 indicates the command failed.
hrconf task
This command performs a task on a logical drive.
Syntax
hrconf TASK START <controller#> LOGICALDRIVE <LogicalDrive#> <options>[noprompt]
hrconf TASK STOP <controller#> LOGICALDRIVE <LogicalDrive#>
Parameters
Logical drive# is the number of the logical drive in which the task is to be performed.
Options specifies the tasks to be started or performed. The following options are available:
•
verify_fix (Verify with fix)
•
verify
•
clear
noprompt : No prompt for confirmation.