HP LD5535 55-inch LED Digital Signage Display User Manual
Page 32
7.
After you have selected the input source and verified that the Group matrix values are correct, click
Next to verify that the Tile ID is assigned correctly.
8.
Assign Tile ID to each display in the matrix by setting the numbers in the display icon to the correct Tile
ID in the matrix. This screen will change the Tile ID setting in each display to correspond to the ID set in
each icon. Tables 1–1 through 1–4 below illustrate what the Tile ID will be, depending on the definition
of the video wall or matrix. The Tile ID defines which portion of the image will be shown on each display
within the wall or matrix. Display Tile IDs are numbered from the upper-left corner of the matrix from
left to right and top to bottom. After setting the Tile ID for each display, click Next.
Tile ID in a 3x3 matrix with select Digital Signage Displays
1
2
3
4
5
6
7
8
9
Tile ID in a 5x5 matrix with select Digital Signage Displays
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Tile ID in a 3x3 matrix with select Digital Signage Displays
1,1
1,2
1,3
2.1
2,2
2,3
3,1
3,2
3,3
Tile ID in a 5x5 matrix with select Digital Signage Displays
1,1
1,2
1,3
1,4
1,5
2.1
2,2
2,3
2,4
2,5
3,1
3,2
3,3
3,4
3,5
4,1
4,2
4,3
4,4
4,5
5,1
5,2
5,3
5,4
5,5
26
Installing HP Network Sign Manager