HP LeftHand P4000 SAN Solutions - Manual (Page 100)

Table 35 Selected details of the hardware report (continued)
Definition Item
•
Driver name
•
Driver version
Information about DNS, if a DNS server is being used, providing the IP address of the
DNS servers. IP address of the DNS servers. DNS data
Information about RAM in the storage system, including values for total memory and free
memory in GB. Memory
Details about the CPU, including model name or manufacturer of the CPU, clock speed
of the CPU, and cache size. CPU
Information about the CPU. CPU seconds shows the number of CPU seconds spent on user
tasks, kernel tasks, and in idle state. Machine uptime is the total time the storage system
has been running from initial boot up. Stat
Selected information about the backplane LEDs: LED support and id LED. Backplane information
Includes chassis serial number and BIOS version Motherboard information
For each drive, reports the model, serial number, and capacity. Drive info
For each drive, reports the status, health, and temperature. Drive status
Information about RAID. This includes: RAID
• Rebuild rate
•
Unused devices
• Statistics
•
Unit number
Information about O/S RAID. RAID O/S partitions
Status information about the boot device: status, capacity in MB, driver version, media
used for device, and model. Boot-device statistics
Information about the O/S RAID for the storage system. Statistics
Identifies devices that make up the O/S RAID configuration, including: Unit number
• Type of storage (BOOT, LOG, SANIQ, DATA)
•
RAID level (0, 1, 5)
• Status (Normal, Rebuilding, Degraded, Off)
•
Capacity
•
Rebuild statistics (% complete, time remaining)
Depending on the storage system, this can include: Controller/cache items
•
Information about the RAID controller card and Battery Backup Unit (BBU)
• Information about RAM.
Shows the type or number of power supplies. Power supply
Status information about the power supplies. Power supplies
Shows for the hardware listed, the status, real measured value, minimum and maximum
values. Sensors
Using log files
If HP Support requests that you send a copy of a log file, use the Log Files tab to save that log file
as a text file.
100 Monitoring the SAN