HP EliteBook 2540p Notebook PC - Manual (Page 159)

File menu
Select To do this
System Information ● View identification information for the computer and the
batteries in the system.
● View specification information for the processor, memory
size, system ROM, video revision, keyboard controller
version, and wireless identification numbers.
Set System Date and Time Change date and time.
● Set Date: MM:DD:YYYY
● Set Time: HH:MM
System Diagnostics ● System Information—Displays the following information:
◦ Identification information for the computer and the
batteries in the system.
◦ Specification information for the processor, memory
size, system ROM, video revision, keyboard
controller version, and wireless identification
numbers.
● Start-up Test—Verifies the system components needed
for starting the computer.
● Run-In Test—Runs a comprehensive check on the
system memory, hard drive, battery, and wireless module
status.
● Hard Disk Test—Runs a comprehensive self-test on any
hard drive in the system.
● Memory Test—Runs a comprehensive check on the
memory module(s).
● Battery Test—Runs a comprehensive check on the
battery.
● Error Log—Displays a log file if any errors have
occurred.
Restore Defaults Replace the configuration settings in Computer Setup with the
original factory settings. (Hard drive mode, password settings,
and security settings are not changed when you restore the
factory settings.)
Reset BIOS security to factory default Resets password to the factory default in case of a forgotten
password.
Ignore Changes and Exit Cancel any changes entered during the current session. Then
exit and restart the computer.
Save Changes and Exit Save any changes entered during the current session. Then
exit and restart the computer. Your changes go into effect
when the computer restarts.
Security menu
NOTE: Some of the menu items listed in this section may not be supported by your computer.
Computer Setup menus 147