HP Designjet T1200 Printer series User Manual
Page 95
Advertising
6.
Select the Device and Document Settings tab, and press the Custom Properties button.
7.
In the Paper/Quality tab, check the Show preview before printing box, and select the paper
type that you intend to use.
NOTE:
If you select neither the paper source nor the paper type, the printer will not print on
Roll protection (T1200 series only) on page 62
8.
Select the print quality (your own choice between speed and quality of printing).
ENWW
Print a project
87
Prin
ting
examples
Advertising
This manual is related to the following products: