Install the printer software, Connect to the printer using connection manager – HP USB Network Print Adapter User Manual
Page 8
Basic setup
8
Install the printer software
Leave your printer attached to the USB Network Printer Adapter.
1.
Insert the printer software CD or start the downloaded driver installation.
2.
When the software asks you to plug in the USB cable, do the following:
a.
Right-click the Connection Manager icon in the system tray (lower-right corner of your screen).
b.
Select Connect.
After a few moments, the icon will change to show a successful connection.
Connect to the printer using Connection Manager
If you already have the printer software installed on this computer follow these instructions.
1.
Right-click the Connection Manager icon in the system tray (lower-right corner of your screen).
2.
Click Connect.
After a few moments, the icon will change to show a successful connection.