HP Lights-Out 100 Remote Management - Manual (Page 23)

Using Integrated Lights-Out 100 23
Accessing the system event log from the CLP
1. Log in to the CLP as described in the "Logging in to the remote management processor (on page
18 )" section.
2. Enter cd /system1/log1.
3. Enter show to display the total number of system event records.
4. Enter show record<n> to display the details of a specific record. For example:
/system1/log1/record1
Targets
Properties
number=1
date=12/20/2004
time=15:22:05
sensordescription= Backplane +12V
eventdescription= Upper Critical-going high
eventdirection=Assertion
Verbs
cd
version
exit
show
reset
oemhp
help
Accessing the system event log from the BIOS setup
1. On the target server, press the F10 key during POST to enter BIOS setup.
2. In the BIOS setup utility, press the right arrow (→) key to navigate to the Advanced menu.
3. Press the down arrow (↓) key to scroll to the IPMI submenu. Press the Enter key.
4. Press the down arrow (↓) key to scroll to the System Event Log submenu. Press the Enter key.
5. Press the down arrow (↓) key to scroll to the following available setup items. The available options
include:
• Clear System Event Log
• View System Event Log
6. Press the Enter key to view the options.
7. Press the Esc key to return to the previous screen, or press the F10 key to save the changes and exit
Setup.
Using the virtual floppy feature
With the virtual floppy feature, you can boot the ProLiant ML110 G3 server with a boot image residing
on a remote server. To boot from a virtual floppy from a remote system:
1. Configure the TFTP server (" Configuring the TFTP Server " on page 24 ).
2. Configuring the virtual floppy on the ProLiant ML110 G3 server using one of the following methods
from:
• BIOS Setup (" Configuring the virtual floppy from the BIOS setup " on page 24 )
• A Web browser
• The CLP (" Configuring virtual floppy from the CLP " on page 25 )