Auto Page CPX-3600 - Manual (Page 3)

TRANSMITTER OPERATION
Transmitter Button System Function Remark
Button
Arm / Lock door
– Button
Arm and Delete
Optional Sensor
Press twice.
Button for 3 seconds
Panic function Press 3 seconds
Button
Disarm & Unlock
Door
– Button
Two Steps Door
Unlock & Disarm
System
Press twice within 3
seconds.
+ Button
3
rd
Channel Auxiliary
+ Button
Car Locator System in Armed.
Button for 2 seconds
Pop Trunk Release Press 2 seconds
–
Passive arming
By-pass
While system is
disarmed
+ Button
Silent Arm / Disarm
Ignition in "off"
position.
+ Button for 1 seconds
Activate Car-Jacking
Ignition in "on"
position. Must be
Programmed “ON”
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
2. The siren will chirp once and the parking lights will flash once indicating
that the system is now armed. The vehicle doors will lock upon arming
when interfaced with the security system.
Note: Defective sensor reminder: If the siren sounds 3 chirps, then you
have left a door, trunk, or hood lid ajar.
SILENT ARMING / DISARMING: Press the + button together on the
transmitter to arm or disarm your security system, No chirp sound will be
heard; arm / disarm confirmation will be through the vehicles parking lights
only.
SHOCK SENSOR / OPTIONAL SENSOR BY-PASS: Pressing the
button
on the transmitter twice within 3 seconds will arm the security system, and
will by-pass the shock sensor or the optional sensor connected to 4 pin plug.
The system will chirp one additional time to confirm the sensor bypass mode
was activated. The sensor bypass feature is programmed to activate for one
arming cycle only. The security system will return to normal operation during
the next arming cycle
4