Document Outline

• HP ProLiant DL320 Generation 5p Server User Guide
• Notice
• Contents
• Component identification
  • Front panel components
    • Front panel components (standard configuration)
    • Front panel components (optional hard drive cage configuration)
  • Front panel LEDs and buttons
    • Front panel LEDs and buttons (standard configuration)
    • Front panel LEDs and buttons (optional hard drive cage configuration)
  • SATA device numbers
    • SATA device numbers (standard configuration)
    • SATA device numbers (optional hard drive cage configuration)
  • Rear panel components
  • PCI expansion slot definitions
  • Rear panel LEDs
  • System board components
    • System maintenance switch
    • NMI functionality
  • System board LEDs
  • System LEDs and internal health LED combinations
  • Internal USB connector
  • Fan locations
• Operations
  • Power up the server
  • Power down the server
  • Remove the server from the rack
  • Remove the primary access panel
  • Remove the secondary access panel
  • Remove the PCI riser board assembly
  • Install the PCI riser board assembly
• Setup
  • Optional installation services
  • Rack planning resources
  • Optimum environment
    • Space and airflow requirements
    • Temperature requirements
    • Power requirements
    • Electrical grounding requirements
  • Rack warnings
  • Identifying the server shipping carton contents
  • Installing hardware options
  • Installing the server into the rack
  • Powering up and configuring the server
  • Installing the operating system
  • Registering the server
• Hardware options installation
  • Introduction
  • Memory options
    • Interleaving and non-interleaving memory configuration
    • DIMM installation guidelines
    • Installing DIMMs
  • Hard drive options
    • Hard drive guidelines
    • Removing a hard drive blank
    • Removing a hard drive
    • Installing a hard drive
  • Installing a four-bay hard drive cage
  • Optical drive assembly (12.7 mm) option
  • Optical drive assembly (9.5 mm) option
  • Expansion board option
  • PCI-X riser board option
  • Storage controller option
  • Battery-backed write cache battery option
  • Dedicated iLO2 optional module connector
  • Internal USB connector option
  • SAS/SATA controller cable
• Cabling
  • Cabling overview
  • Server cabling
  • Embedded SATA controller cabling
    • Embedded SATA controller cabling (standard configuration)
    • Embedded SATA controller cabling (optional hard drive cage configuration)
  • Optional SAS controller cabling
    • Optional SAS controller cabling (standard configuration)
    • Optional SAS controller cabling (optional hard drive cage configuration)
  • Battery cabling for BBWC
    • BBWC battery cabling to an optional controller in slot 4
    • BBWC battery cabling to an optional controller in slot 5
  • Optional internal USB cabling
• Configuration and utilities
  • Configuration tools
    • SmartStart software
      • SmartStart Scripting Toolkit
    • HP ROM-Based Setup Utility
      • Using RBSU
      • Auto-configuration process
      • Boot options
      • BIOS Serial Console
    • Array Configuration Utility
    • HP ProLiant Essentials Rapid Deployment Pack
    • Re-entering the server serial number and product ID
  • Management tools
    • Automatic Server Recovery
    • ROMPaq utility
    • Integrated Lights-Out 2 technology
    • Erase Utility
    • HP Systems Insight Manager
    • Management Agents
    • USB support and functionality
      • USB support
      • Internal USB functionality
  • Diagnostic tools
    • HP Insight Diagnostics
    • HP Insight Diagnostics survey functionality
    • Integrated Management Log
    • Array Diagnostic Utility
    • Manual ROMPaq disaster recovery
  • Keeping the system current
    • Drivers
    • Version control
    • ProLiant Support Packs
    • Operating system version support
    • System Online ROM Flash Component Utility
    • Change control and proactive notification
    • Care Pack
• Troubleshooting
  • Troubleshooting resources
  • Server diagnostic steps
  • Important safety information
    • Symbols on equipment
    • Warnings and cautions
  • Prepare the server for diagnosis
  • Symptom information
  • Service notifications
  • Loose connections
  • Diagnostic steps
    • Start diagnosis flowchart
    • General diagnosis flowchart
    • Server power-on problems flowchart
    • POST problems flowchart
    • OS boot problems flowchart
    • Server fault indications flowchart
  • POST error messages and beep codes
• Battery replacement
• Regulatory compliance notices
  • Regulatory compliance identification numbers
  • Federal Communications Commission notice
    • FCC rating label
    • Class A equipment
    • Class B equipment
  • Declaration of conformity for products marked with the FCC logo, United States only
  • Modifications
  • Cables
  • Canadian notice (Avis Canadien)
  • European Union regulatory notice
  • Disposal of waste equipment by users in private households in the European Union
  • Japanese notice
  • BSMI notice
  • Korean notice
  • Laser compliance
  • Battery replacement notice
  • Taiwan battery recycling notice
  • Power cord statement for Japan
• Electrostatic discharge
  • Preventing electrostatic discharge
  • Grounding methods to prevent electrostatic discharge
• Specifications
  • Environmental specifications
  • Server specifications
• Technical support
  • Related documents
  • HP contact information
  • Customer Self Repair
• Acronyms and abbreviations
• Index