HP Deskjet D5560 Printer - Manual (Page 7)

2 Finish setting up the HP Printer
• Wireless Connection using One Button Wireless Setup with a WPS enabled router
• Traditional Wireless Connection
• USB Connection
• Install the software for a network connection
Wireless Connection using One Button Wireless Setup with
a WPS enabled router
To connect the HP Printer to a wireless network using WiFi Protected Setup (WPS), you
will need the following:
❑ A wireless 802.11 network that includes a WPS-enabled wireless router or access
point.
❑ A desktop computer or laptop with either wireless networking support, or a network
interface card (NIC). The computer must be connected to the wireless network that
you intend to install the HP Printer on.
Wireless Connection using One Button Wireless Setup with a WPS enabled router
1. Do one of the following:
Use Push Button (PBC) method
a. Set up wireless connection.
❑ Press and hold the Wireless button for two seconds.
❑ Press the corresponding button on the WPS-enabled router or other
networking device.
❑ The Wireless icon and signal strength bar appear solid on successful
configuration of the wireless network.
b. Install Software.
NOTE: The product begins a timer for approximately two minutes in which the
corresponding button on the networking device needs to be pressed.
Wireless Connection using One Button Wireless Setup with a WPS enabled router 5
Finish
set
ting up the H
P
Print
er