Monitor-level commands, Start update, Stop update – HP Integrity NonStop H-Series User Manual
Page 57: Restart update, Monitor-level commands 5-5, Start update 5-5, Stop update 5-5, Restart update 5-5
SDR Monitoring and Control
HP NonStop SQL DDL Replicator User’s Guide —545799-006
5-5
Monitor-Level Commands
Monitor-Level Commands
The SDR monitor starts and stops the SDR updaters on the backup system. The
following commands are related to monitor functions:
START UPDATE
starts all SDR updaters or the updater for a specific RDF
configuration.
Specifying HOLD starts the updaters in the hold state, even if you have released the
updater prior to issuing the START.
Use the RELEASE command to remove the updater from the HOLD state.
STOP UPDATE
stops all SDR updaters or the updater for a specific RDF configuration.
The STATUS UPDATE command shows the updater as “Not executing”:
RESTART UPDATE
stops and then starts each SDR updater. The updaters can be
restarted in a HOLD state.
SDRCOM 39? START UPDATE
SDR updater ATOMJ will be started.
SDRCOM 37? STOP UPDATE
SDR updater ATOMJ will be stopped.
SDRCOM 37? STATUS UPDATE
SDR monitor $ZSDR (5,627) is monitoring 1 RDF environment(s).
Current SDRUPDT processes: 0
Total SDRUPDT processes: 3
*** SDR update is stopped ***
RDF Control Subvol ATOMJ
SDR Updater Process Not executing
RDF Primary Sys \ATOM
RDF Backup Sys \SIERRA
State Updater idle (Update OFF)