Time, Volume, Monitor commands – HP Integrity NonStop H-Series User Manual
Page 99: Emslevel, Time 6-35, Volume 6-35, Monitor commands 6-35, Emslevel 6-35
SDR Commands
HP NonStop SQL DDL Replicator User’s Guide —545799-006
6-35
TIME
TIME
Displays the current local time of day as obtained from the local Guardian timekeeping
function. You may also request the local time as seen by another system on your
Expand network.
systemname
identifies an Expand system for which the local system time is desired.
VOLUME
Changes the default volume and/or subvolume for filename expansion. VOLUME can
be abbreviated to V.
volume
specifies a new default volume; does not alter the default subvolume.
subvolume
specifies a new default subvolume; does not alter the default volume.
Monitor Commands
Each of the following commands are recognized by the monitor process. To send a
command to the monitor, use the
command.
EMSLEVEL
Sets the level of detail displayed in the EMS log.
CRITICAL
displays only messages that are critical or that require operator intervention.
DETAIL
displays all EMS messages generated by the SDR monitor and SDR updaters.
NORMAL
displays essential informational messages, action messages and critical
messages.
TIME [ systemname ]
V[OLUME] [ volume | subvolume | volume.subvolume ]
MONITOR EMSLEVEL { CRITICAL | DETAIL | NORMAL | TRACE }