HP StorageWorks 2.64 Director Switch - Manual (Page 205)

Information and Error Messages
205 High Availability Fabric Manager User Guide
Invalid port number. Valid
ports are
(0- < nn > ).
You have specified an
invalid port number.
Specify a valid port
number, in the range 0 to
the maximum number of
ports on the product
minus 1. For example, for
a switch with 32 ports, the
valid port range is 0–31
Invalid product selection. At the New Product
dialog box, an invalid
product was selected.
Choose a valid product
and retry the operation.
Invalid request. Three conditions result in
this message:
The user tried to add or
modify a product from
product view and the
network address is
already in use. (Network
addresses must be
unique.)
The user tried to create a
new user with a user
name that already exists.
(User names must be
unique.)
The user tried to delete
default Administrator
user. (The default
Administrator user cannot
be deleted.)
Choose the action that is
appropriate to the activity
that caused the error:
Network address: Specify
a unique network address
for the product.
User name: Specify a
unique user name for the
new user ID.
Do not delete the default
Administrator user.
Invalid UDP port number. The specified user
datagram protocol (UDP)
port number is invalid.
The number must be an
integer from 1 through
65535 inclusive.
Verify and enter a valid
UDP port number.
Table 9: High Availability Fabric Manager Messages (Continued)
Message Description Action