HP XP P9000 Auto LUN Software - Manual (Page 31)

6. As needed, modify any auto migration plan parameters. For details, see “Setting up auto
migration plan parameters” (page 29) .
7. Click Make New Plan.
All the existing auto migration plans are deleted and new auto migration plans are created
based on the new settings.
Stopping the Auto Migration function
Before creating a manual migration plan, the Auto Migration function must be disabled. If you
perform a manual migration operation, all current Auto Migration plans are canceled.
Procedure 6 To stop the Auto Migration function:
1. Click Actions
→Other Function→Auto LUN to open the Auto LUN window.
2. Click to change to Modify mode.
3. In the Auto LUN window, click Auto LUN. A different window appears.
4. Click the Auto Plan tab to display the “Auto Plan window” (page 59) .
5. Click Delete All to stop all current auto migration plans.
6. Set the Auto Migration function to Disable.
7. Click Set to apply the settings to the storage system.
Reserving a volume
To perform manual or auto migration, volumes in a HDD class must be in Reserve status to be
considered as target volume candidates. Auto LUN cannot take place when no volumes are
reserved.
Prerequisites
•
The volume meets all requirements as a target volume candidate
Procedure 7 To reserve a volume:
1. Click Actions
→Other Function→Auto LUN to open the Auto LUN window.
2. Click to change to Modify mode.
3. In the Auto LUN window, click Auto LUN. A different window appears.
Stopping the Auto Migration function 31