HP vs17x 17 inch LCD Monitor - Manual (Page 24)

Setting Up the Monitor
3–4 User’s Guide
4. Tilt the monitor for proper viewing. Do not tilt the monitor
beyond its easily adjustable position.
Adjusting the vs monitor tilt
Wall Mounting the vs Monitor
Before you mount the monitor on a wall, a swing arm, or other
mounting fixture, you must remove the monitor base and the
pedestal. You will need a Phillips-head screwdriver. Read the
following warning and caution statements before beginning the
procedure.
Å
WARNING: Ensure that the monitor is lying flat, with the screen
down. Attempting to remove the base or pedestal from the monitor
while it is upright may result in injury to the user.
Ä
CAUTION: Before disassembling the monitor, turn off the monitor
power, and disconnect all power, video, and audio cables.
To install the vs monitor on a wall, a swing arm, or other
mounting fixture:
1. Remove the vs monitor base. Refer to “Removing the vs
Monitor Base” in the previous chapter. Keep the monitor
panel screen down on the flat, soft area.
30º
- 5º