Enclosure numbering with shelf id expansion cables – HP 3000 Enterprise Virtual Array User Manual
Page 82
0046a-2
13
13
1
2
3
4
5
6
7
8
9
10
11
12
13
Figure 37 Enclosure numbering with shelf ID expansion cables
NOTE:
If an expansion rack is used with your Enterprise configuration, the enclosure numbering shown above
may change or contain additional numbering. Refer to the HP StorageWorks Enterprise Virtual Array
Hardware Configuration Guide for more information.
For more information about the reporting group number, see
Viewing the Reporting Group Feature
.
Enclosure address bus connections
Connecting the enclosures to the rack JBs or shelf ID expansion cables establishes the enclosure address
bus. The enclosures are automatically numbered, based on either the JB or shelf ID expansion cable to
which they are connected.
and
show the typical configuration of a 41U cabinet
with 14 enclosures (
3U
high).
82
Storage system hardware components