HP Compaq NC3123 Fast Ethernet NIC PCI Adapter - Manual (Page 15)

2-4 Compaq NC3123 Fast Ethernet Server Adapter User Guide
Figure 2-2. WOL cable and connector on the NC3123 Server Adapter
3. Locate the WOL connector on your motherboard. The location varies, depending on
vendor and model of motherboard. The WOL connector is usually located near other
power connectors, such as the LED connectors.
4. Connect the other end of the WOL cable to the connector on the motherboard as
shown in Figure 2-2. Note that the connector is keyed.
5. Some servers may require you to change a setting in the BIOS or Setup program to
enable the WOL feature. Check your server owner’s manual or contact your dealer for
more information.
6. Replace the server cover and plug the power cord into the power outlet.