HP StorageWorks Data Replication Manager Software - Manual (Page 126)

6. To redirect output to a file, use the command -o as follows (B6000-series and above):
show libraries -g <Group Name> -a <Device Serial Number> -s <Service
Set Serial Number> -o <output File Name>
For example:
show libraries -g Un-Grouped -a hpb499bac0d9a2 -s hpb499bac0d9a202
-o C:\LibraryList.txt
Viewing NAS shares
The screen shots are for Gen2 devices unless stated otherwise.
1.
At the command prompt, enter the following command:
show nasshares
The client displays the groups that you own.
2. Enter the appropriate group number or group name of the device.
The client displays the list of devices for the selected group.
3. Enter the appropriate device number or device serial number to view its NAS shares and their
status details.
126 Using Command Line Interface for Enterprise Manager