HP Mini 210-3001xx PC - Manual (Page 56)

9 Memory modules
The computer has one memory module compartment. The capacity of the computer can be upgraded
by upgrading the existing memory module in the memory module slot.
WARNING! To reduce the risk of electric shock and damage to the equipment, unplug the power
cord and remove all batteries before installing a memory module.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before beginning
any procedure, ensure that you are discharged of static electricity by touching a grounded metal
object.
To replace the memory module:
CAUTION: To prevent information loss or an unresponsive system:
Shut down the computer before replacing the memory module. Do not remove the memory module
while the computer is on, in the Suspend state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
1. Save your work and shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Unplug the power cord from the AC outlet and remove the battery (see Removing the battery
on page 32 ).
4. Remove the service door (see Replacing or upgrading the hard drive on page 38 ).
5. Remove the existing memory module:
a. Pull away the retention clips (1) on each side of the memory module.
The memory module tilts up.
46 Chapter 9 Memory modules